Rep Fitness
Rep Fitness Apollo Squat Stand
A compact 11-gauge 3x3 squat stand with a pull-up bar that delivers heavy-rack steel in a small, freestanding footprint.
USA (Denver, Colorado)
Rep Fitness has earned a loyal home-gym following by delivering racks, benches, and plates that punch well above their price point. The Denver-based company is known for thoughtful design touches and frequent product iterations driven by community feedback. It's a go-to for budget-conscious lifters who still want commercial-quality steel.
Visit Rep Fitness →Rep Fitness
A compact 11-gauge 3x3 squat stand with a pull-up bar that delivers heavy-rack steel in a small, freestanding footprint.
Rep Fitness
A wall-mounted folding rack on 11-gauge 3x3 steel that swings flat against the wall to reclaim your garage floor in seconds.
Rep Fitness
Premium open-front half rack in 3x3 11-gauge steel with integrated plate storage, weighted base stability, and Westside spacing.
Rep Fitness
Affordable 14-gauge 2x2 starter power rack with a pull-up bar and standard hole spacing, built for first home gyms.
Rep Fitness
An affordable entry-level power rack with a real pull-up bar and safety bars that handles a beginner's whole barbell program.
Rep Fitness
Mid-tier 3x3 11-gauge power rack with standard hole spacing, a strong value pick between budget and flagship Rep racks.
Rep Fitness
Rep's flagship 11-gauge, 3x3 power rack with Westside hole spacing and a deep attachment ecosystem at a mid-tier price.
Rep Fitness
Rep's no-compromise 11-gauge mega-rack with 1-inch hole spacing top to bottom and the widest accessory catalog they make.
Rep Fitness
Wall-mounted folding rack in 3x3 11-gauge steel that swings flat to free up the room when you are not lifting.
Rep Fitness
A competition-grade 28mm Olympic bar with premium needle bearings, high whip, and a hard-chrome finish.
Rep Fitness
A thin 27mm deadlift-specific bar with high whip and aggressive knurl to maximize pulls off the floor.
Rep Fitness
An affordable multipurpose 28.5mm bar with Cerakote shaft, hard-chrome sleeves, and dual knurl marks.
Rep Fitness
A stiff 29mm power bar with deep aggressive knurl and center knurl, tuned for heavy raw powerlifting.
Rep Fitness
Rep's dedicated 28mm Olympic bar with needle bearings, high whip, and dual knurl marks for snatches and cleans.
Rep Fitness
A stainless 29mm power bar with aggressive knurl and center knurl, tuned for heavy squats, bench, and deadlift.
Rep Fitness
A value-leading FID bench with seven back positions, three seat angles, and a 1,000-pound capacity that punches above its price.
Rep Fitness
A premium FID bench with a near-zero pad gap, twelve back positions, and a 1,000-pound capacity for lifters who want the best.
Rep Fitness
A competition-height flat bench with an IPF-legal 17.5-inch pad, tripod base, and 1,000-pound capacity for serious pressing.
Rep Fitness
Rep's mid-tier FID bench pairing a tight pad gap with a wide angle range, a strong value for a do-everything home bench.
Rep Fitness
An upgraded AB-4000 with a wider pad and refined geometry, bridging Rep's mid-tier and premium adjustable benches.
Rep Fitness
Rep's premium adjustable bench with a no-gap design and articulating geometry that closes the lumbar void at every angle.
Rep Fitness
Rep's value flat bench with a wide pad and solid capacity, a dependable everyday workhorse at an entry price.
Rep Fitness
A foldable flat bench that collapses to a slim profile for storage while keeping a firm pad and stable footing in use.
Rep Fitness
REP's 25 lb Black Bumper offers a low-bounce virgin-rubber disc with a chamfered insert at a price that undercuts most name-brand bumpers.
Rep Fitness
Rep's value bumper with a thin, dense profile, low odor virgin-blend rubber, and a chamfered stainless insert that resists pull-out.
Rep Fitness
A full equal-diameter bumper set where every plate shares the 17.7 inch height, giving a flat surface and consistent bar position.
Rep Fitness
A classic deep-dish cast-iron plate set with a baked enamel finish, thin profile, and gym-grade durability for traditional barbell work.
Rep Fitness
Premium urethane-encased plates with a near-indestructible shell, minimal odor, and a thin profile that looks at home in any gym.
Rep Fitness
REP's rubber-coated change plate set covers 1.25, 2.5, and 5 lb fractional jumps, the small increments that keep a strength program progressing.
Rep Fitness
REP's Stealth competition bumper is a thin, dead-bounce all-black disc with a calibrated tolerance, sold as a single for precise loading.
Rep Fitness
Lighter QuickDraw pair: cradle-lever selection from 7.5 to 40 lb per hand, a tidy choice for conditioning and accessory work.
Rep Fitness
Rep's clever adjustable: weight set with the bell still in the cradle via a sliding lever, reaching 10 to 60 lb per hand.
Rep Fitness
Heavy single-bell version of Rep's QuickDraw: cradle-lever selection from 10 to 80 lb for strong home pressers.
Rep Fitness
Top-tier QuickDraw pair reaching 100 lb per hand with the squeeze-handle selector and included cradles for heavy training.
Rep Fitness
Compact single QuickDraw adjusting 5 to 25 lb with REP's squeeze-handle selector, ideal for accessory work and rehab.
Rep Fitness
Light QuickDraw pair adjusting 5 to 30 lb per hand with the squeeze-handle selector, built for high-rep and circuit work.
Rep Fitness
A wide-range adjustable bell covering 12 to 50 lb, condensing a sizable kettlebell ladder into a single space-saving unit.
Rep Fitness
A 28 kg gravity-cast iron bell with a textured powder coat and a wide chalk-friendly handle, sized for heavy swings and one-arm work.
Rep Fitness
A single-cast 88 lb cast-iron bell with a powder-coated finish and wide handle, sized for heavy two-hand swings and loaded carries.
Rep Fitness
A 16 kg steel competition bell with the standardized uniform shell and 35 mm handle, offered at REP's typically aggressive value pricing.
Rep Fitness
A 50 kg steel competition bell with uniform sport sizing and a 35 mm handle, built as the top rung for the strongest lifters.
Rep Fitness
Rep's value cast-iron bell pairs a textured powder coat and gravity casting with pricing that undercuts most premium brands.
Rep Fitness
The 20 kg Rep cast-iron bell, a midweight value pick with seamless casting and a chalk-friendly textured coat.
Rep Fitness
Value-priced pair of plate-loadable farmers handles with knurled grips and a low, stable frame for heavy loaded carries.
Rep Fitness
Heavy-gauge prowler-style push sled with tall and low push handles, a loading post, and a pull strap anchor for all-around conditioning.
Rep Fitness
Plate-loadable pressing log with neutral recessed handles and a fat steel shell, priced to make log training accessible at home.
Rep Fitness
Affordable heavy-duty sandbag with reinforced handles and inner filler bladders, sized for cleans, carries, and conditioning.